Mat-Tec AG
Unterer Graben 27
CH-8401 Winterthur, Schweiz


info@mat-tec.ch
Fon +41 52 202 54 44
Fax +41 52 202 54 45

Mat-Tec AG

Publikationen H.J. Schindler

siehe auch unter Bibliothek (PDF-Downloads)


  1. Schindler, H.J., Sprödbruchprüfung von Stählen aus der Stahlbetontechnik, Material u. Technik, Vol. 6, No. 1, p. 9-17, 1978

  2. Schindler, H.J., Sayir, M., Path- instability of a crack in a beam, J. Appl. Mathematics and Physics (ZAMP), Vol. 32, p. 570 - 581, 1981

  3. Schindler, H.J., Dynamischer Bruch eines Balkens unter Biegung, Diss. ETH-Nr. 7079, 1982

  4. Schindler, H.J., Kolsky, H., Multiple fractures produced by the bending of brittle beams, J. Mech. Phys. Solids, vol. 31, No. 5, p. 427-437, 1983

  5. Schindler, H.J., Sayir, M., Path of a crack in a beam due to dynamic flexural fracture, Int. Journal of Fracture, Vol. 25, p. 95 - 107, 1984,

  6. Schindler, H.J., Kolsky, H., Instabilities in the fracture of brittle beams under flexural loading, Inst. Phys. Conf. Ser. No. 70, Oxford, 1984

  7. Schindler, H.J., On the ralationship between J-Integral and crack opening displacement, Engineering Fracture Mechanics, Vol. 20, No. 2, p. 281-287, 1984

  8. Schindler, H.J., Nichtlineares finites Element zur Modellierung eines frei laufenden Exzenters, Berichtband der Seminartagung "Nicht-lineare Syseme", ETH Zürich, 1987

  9. Schindler, H.J., On the path-stability of standard and side-grooved DCB-specimen, Proceedings of the 7th European Conf. on Fracture, Budapest, 1988

  10. Schindler, H.J., Morf, U., Toughness and fracture behaviour of obsolete wrought bridge steel, Report IABSE Workshop Lausanne 1990

  11. Schindler, H.J., Crack-growth in rollers due to moving Hertzian compression, Proceedings of the 8th European Conf. on Fracture, Torino, 1990

  12. Schindler, H.J., Morf, U., Auslegung geschweisster Druckrohrleitungen mit erweitertem Sicherheitskonzept und bruchmechanischer Analyse, Berichtband 6. Int. Seminar Wasserkraftantlagen, Wien, 1990

  13. Schindler, H.J., Zäher Bruch eines rissbehafteten Plattenstreifens: Vergleich zwischen Experiment und analytischer Berechnung, Berichtband DVM-Tagung Werkstoffprüfung 1990, Bad Nauheim, 1990

  14. Schindler, H.J., Kieselbach, R., Zähes Versagen von gekerbten und angerissenen Zylindern unter Innendruck, Berichtband der 23. Vortragsveranstaltung DVM-AK Bruchvorgänge, Berlin, 1991

  15. Schindler, H.J., Determination of fracture mechanics material properties utilizing notched test specimens, Proceed. 6th, Int. Conf. Mech. Behaviour of Materials, Kyoto, 1991, p. 159 - 164

  16. Kübler, J., Schindler, H.J., Muster, W., Influence of aging on the fracture toughness of cryogenic austenitic materials, evaluation by a simple test method, Advances in Cryogenic Engineering Materials, Vol. 38, Ed. F.R. Fickett and R.P. Reed, Plenum Press, N.Y., 1992, 191-198

  17. Schindler, H.J., Approximative Bestimmung dynamischer Jc-Werte und J-R-Kurven mit Schlagbiegeversuchen, Tagungsband der 24. Vortragsveranstaltung des DVM-Arbeitskreises Bruchvorgänge Aachen, p.119 - 129, 1992

  18. Schindler, H.J., Tearing Stability of Surface Cracks in Plates or Shells, Proc. of 9th European Conf. on Fracture, Varna, p. 1157-1172, 1992

  19. Schindler, H.J., Toughness Testing and Assesssment of Welds, Int. Conf. on Engineering Design in Welded Constructions, Madrid, 205-212, 1992

  20. Schindler, H.J., A Closer Look at Estimation of Fracture Toughness from Charpy V-Notch Tests, Int. J. Pressure Vessels and Piping, Vol. 55, 1993, 203-212

  21. Schindler, H.J., Weight Functions for Deep Cracks and High Stress Gradients, Proc. Int. Conference on Fracture, Kiev, 1993, 1266-1275

  22. Nevalainen, M, Wallin, K., Rintamaa, R., Schindler, H.J., EM-Round Robin Test Programme, Part1: Comparison between results of VTT and EMPA, VTT-Report VTT-MET B-249, 1993

  23. Schindler, H.J., Morf, U., Nachweis der Sprödbruchsicherheit auf der Basis der ”erforderlichen Zähigkeit”, Berichtsband zur 26. Tagung des DVM-AK Bruchvorgänge, DVM, 1994, 423-422

  24. Schindler, H.J., On the Required Toughness of Structural Materials, Proc. of 2nd. Int. Conf. on Engineering Integrity Assessment, Glasgow, 1994, 397-405

  25. Schindler, H.J, Cheng, W., Finnie, I., Determination of Residual Stress in a Roller of High Strength Steel, Proc. of the 4th Int. Conf. on Residual Stress, Baltimore, 1994

  26. Schindler, H.J., Veidt, M., Low-Cost Dynamic Tensile Testing, J. de Physique IV, Colloque C8, Supplement au J. de Physique III, Vol. 4, 1994, C8-135-C8-140

  27. Schindler, H.J., Dynamische Zähigkeitsprüfungen, Int. Statusseminar Werkstoffdynamik, EMPA-Dübendorf, 6.10.95, p, 8.1 - 8.13

  28. Schindler, H.J., Von Formeln und Materialien. Die "Tetmajer-Gerade" und ihre wissenschaftlich-technische Bedeutung In: Ludwig von Tetmajer Przerwa, Hrsg. J. Zielinski, p. 107-109, 1995

  29. Schindler, H.J., A CTOA-based approach to leak-before-break behaviour, 7th int. Conference on Mechanical Behavious of Materials, The Hague, 18 May-2-June 1995, Book of Abstracts, p. 527-528

  30. Schindler, H.J., Experimentelle Bestimmung von Spannungsintensitätsfaktoren aus Eigenspannungen, Berichtsband zur 27. Vortragsveranstaltung des DVM-Arbeitskreises Bruchvorgänge, Köln-Porz, 14.-15. Feb. 1995, p. 421 - 430

  31. Schindler, H.J., Determination and use of fracture toughness under increased loading rates, In: Statusseminar Werkstoffdynamik, EMPA Dübendorf, 6. Okt. 1995, p. 8.1 - 8.13

  32. Schindler, H.J., Toughness evaluation and assessment of old bridge steel, Proceedings of IABSE syposium on extending the lifespan of structures, San Francisco, 1995, Vol. 73/2 p. 1313 - 1318

  33. Schindler, H.J., Varga, T., Njo, H., Prantl, G., Key issues of instrumented precracked charpy-type testing in irradiation surveillance programmes. In: Int. symposium on materials aging and component life extension, Mailand, 10-13 October 1995, Vol. II, p.1367-1377

  34. Schindler, H.J., Morf, U., Schadens- und Sicherheitsanalyse an betriebsgeschädigten Stahlrollen von Brückenlagern. Forschungsauftrag 87/90 auf Antrag der Arbeitsgruppe für Brückenforschung des ASB.EVED/ ASB Bericht Nr. 517, Juni 1995

  35. Schindler, H.J., Determination of residual stress distributions from measured stress intensity factors, Int. Journ of Fracture 74, R23 - R30,1995

  36. Schindler, H.J. Nguyen, C.H. Tagungsband zum Statusseminar Werkstoffdynamik - Werkstoffverhalten unter schneller Beanspruchung, organisiert durch EMPA und SVMT. Dübendorf, 6. Oktober 1995, ca. 175 S.

  37. Schindler, H.J., The Use of Instrumented Impact Testing on Precracked Charpy Specimens in Engineering Integrity Assessment Evaluating Material Properties by Dynamic Testing, ESIS 20, Mechanical Engineering Publications, London, 1996, p. 45 - 58,

  38. Schindler, H.J., Landolt, R., Experimental determination of residual stresses and the resulting stress intensity factors in rectangular plates, Proceedings 4th. European Conf. on Residual Stresses, Ed. S. Denis, et al., June 1996, 509-517

  39. Schindler, H.J., Single Specimen Methods to Evaluate J-R-Curves from Instrumented Charpy Tests: Results of a Round Robin ECF 11- Mechanisms and Mechanics of Damage and Failure, Volume III, Editor J. Petit, 1996, p.1977 - 1988

  40. Schindler, H.J., Estimation of the Dynamic J-R-Curve from a single Impact Bending Test ECF 11- Mechanisms and Mechanics of Damage and Failure, Volume II, Editor J. Petit, 1996, p. 2007 - 2012

  41. Schindler, H.J., Böhme,W., Stark-Seuken, D., Blumenauer, H., Wobst, K., Erprobung von Einprobenmethoden zur bruchmechanischen Auswertung instrumentierter Kerbschlagbiegeversuche DVM-Bericht 228, 28. Tagung des DVM-Arbeitskreises Bruchvorgänge, 26. - 27. Februar, 1996, p 67 - 76

  42. Morf, U.; Schindler, H.J. Nachweis der Sprödbruchsicherheit für geschweisste Stahlkonstruktionen. Stahlbau 65(1996)11,S.415-420

  43. Schindler, H.J., Teaching and application of engineering fracture mechanics: the necessity of uniting simplicity and rationality. In: Teaching and education in fracture and fatigue, Rossmanith, H.P. (Editor). London: E & FN Spon, 1996, ISBN 0-419- 2070-77.

  44. Schindler, H.J., A CTOA-based approach to burst and leak-before-break behaviour. International Journal of Pressure Vessels & Piping 69 (1996) 2, S.125-134

  45. Schindler, H.J. Determination of residual stress distributions from measured stress intensity factors. International journal of fracture 74(1995)S.R23-R30

  46. Böhme, W.; Schindler, H.J. Single specimen methods to evaluate J-R-curves from instrumented charpy tests: results of a round robin. In: ECF 11: Mechanisms and mechanics of damage and failure - 11th European conference on fracture, Poitiers- Futuroscope, France, 3-6 September 1996, Vol.III, S.1977-1982

  47. Schindler, H.J. Estimation of the dynamic J-R-curve from a single impact bending test. In: ECF 11: Mechanisms and mechanics of damage and failure - 11th biennial European conference on fracture, Poitiers- Futuroscope, France, 1996, Vol.III, S.2007-2012

  48. Schindler, H.J.; Böhme, W.; Stark-Seuken, D.; Blumenauer, H.; Wobst, K. Erprobung von Einprobenmethoden zur bruchmechanischen Auswertung instrumentierter Kerbschlagbiegeversuche. In: Berichtsband 28. Tagung des DVM- Arbeitskreises Bruchvorgänge, Bremen, 1996, S.67-77

  49. Schindler, H.J.; Landolt, R. Rissbeanspruchung durch Eigenspannungen - Ein neues Verfahren zur experimentellen Bestimmung von Spannungsintensitätsfaktoren. EMPA- Jahresbericht 1995: Werkstoffe, S.55-59

  50. H.J. Schindler, Mechanische Verfahren zur Bestimmung von Eigenspannungen, Tagungsband zur Seminartagung ”Eigenspannungen - Fluch oder Segen?”, EMPA, 1996, 79-90

  51. Schindler, H.J. Grösseneffekte im Bruchverhalten keramischer Werkstoffe. In: Berichtsband 29. Tagung des DVM- Arbeitskreises Bruchvorgänge, Stuttgart, 25-26 Februar 1997, S. 359-368

  52. Schindler, H.J., Bertschinger, P. Some Steps Towards Automation of the Crack Compliance Method to Measure Residual Stress Distributions. In: Proc. 5th Int. Conference on Res. Stress, Linköping, June 1997

  53. Primas, R., Schindler, H.J. Bruchmechanische Bauteilbewertung: Verfahren, Regelwerke, Anwendungen. In: Berichtsband 29. Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart, 25-26 Februar 1997, S, 71-82

  54. Primas, R, Schindler, H.J. Bruchmechanische Analyse an einem grossen Bajonettgewinde. In: Berichtsband, 29. Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart, 25-26. Februar 1997,

  55. Primas, R, Schindler, H.J., Huwiler, R., Morf, U., Sicherheitsanalyse eines Druckbehälters: Nachauswertung eines Schadenfalles. In: Inter- nationale Konferenz über Schweisstechnik, Werkstoffe und Werkstoffprüfung, Bruchmechanik und Qualitätsmanagement, TU Wien, 22-25 September 1997, 393-402

  56. Nguyen, C.H., Schindler, H.J. On spurious reflection waves in Hopkinson bar tensile tests using a collar. J. Phys. IV France, 7, Colloque C3, 1997, C3-85 - C3-90

  57. Schindler, H.J. Size Effects on Fracture Toughness of Brittle Materials. International Journal of Fracture 82, 1996, R3-R10

  58. Schindler, H.J., Finnie, I. Determination of Residual Stresses and the Resulting Stress Intensity Factors on the Ligament of Pre-Cracked Plates. In: Proc. Int. Conf. on Fracture, Sydney, 1997, 523-530

  59. Schindler, H.J., Cheng, W., Finnie, I., Experimental determination of stress intensity factors due to residual stresses, Experimental Mechanics, Vol. 37, 1997, 272-277

  60. Schindler, H.J., Veidt, M., Determination of tensile properties at increased strain rates and various temperatures, J. Testing and Evaluation, 25, 1997, 571-575

  61. Veidt, M., Schindler, H.J. On the effect of notch radius and local friction on the mode I and II fracture toughness of a high strength steel, Eng. Fracture Mechanics, Vol. 58, 1997, 223-231

  62. Schindler, H.J. Analytisches Modell zur Berechnung der Rissausbreitungsgeschwindigkeit unter Ermüdungsbeanspruchung, Berichtsband der 30. Vortragsveranstaltung des DVM-AK Bruchvorgänge, 1998, 333-342

  63. Schindler, H.J, Veidt, M., Fracture Toughness Evaluation from Instrumented Sub-size Charpy-Type Tests, in: Small Specimen Test Techniques, ASTM STP 1329, W.R. Corowin, et al., Eds., 1998, 48 - 62

  64. Schindler, H.J., Bond, P., Prantl, G., The effect of crack length on fracture mechanics properties estimated from instrumented Charpy-type-tests, Proc. 12th European Conference on Fracture, Sheffield, 1998, 1279-1285

  65. Schindler, H.J., The correlation between Charpy fracture energy and fracture toughness from a theoretical point of view, Proc. 12th European Conference on Fracture, Sheffield, 1998, 841-847

  66. Schindler, H.J., Kieselbach, R., Grundlagen und Anwendungen der technischen Bruchmechanik, Tagungsband zum Weiterbildungsseminar Bruchmechanische Bauteilbewertung, EMPA, November 1998

  67. H.J. Schindler, Charakterisierung und Abschätzung des Ermüdungsrissverhaltens im Bereich des Schwellenwerts, Berichtband der 31. Tagung des DVM AK Bruchvorgänge, DVM-Bericht 231, Darmstadt, 1999, 121-131

  68. Bertschinger, P., Schindler, H.J., Soyka, G., Experimentelle Ermittlung der Rissschliessung an Baustahl und Schweisseisen im Bereich des Schwellenwerts, Berichtband der 31. Tagung des DVM AK Bruchvorgänge, DVM-Bericht 231, Darmstadt, 1999, 153-163

  69. Schindler, H.J., Experimental Determination of Crack Closure by the Cut Compliance Technique, in: Advances in Fatigue Crack Closure Measurement and Analysis, ASTM STP 1343, R.C. McClung and J.C. Newman, Jr., Eds., American Society for Testing and Materials, 1999, pp 175-187.

  70. Schindler, H.J., An Engineering Framework to Account for Crack-Tip-Constraints in Fracture Mechanics, Proc. of 8th Int. Conf. on the Mechanical Behaviour of Materials, Victoria, CA, 1999, pp. 25 – 30

  71. Schindler, H.J. On the Significance of Crack Tip Shielding in Fatigue Threshold - Theoretical Relations and Experimental Implications, in: Advances in Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372, J.C. Newman and R.S. Piascik, Eds., American Society for Testing and Materials, West Conshohocken, PA, 2000, pp. 46-62

  72. Schindler H.J., Ermittlung bruchmechanischer Kennwerte mittels Schlagbiegeversuchen an Kleinproben, DVM-Bericht 232, Berlin, 2000, DVM 2000, 133-142

  73. Bertschinger, P, Schindler, H.J. Motavalli, M., Veidt, M., Einsatzmöglichkeiten des instrumentierten Kerbschlaghammers in der Material- und Bauteilprüfung, DVM-Bericht 232, Berlin, 2000, DVM 2000, 143-141

  74. Schindler, H.J., “Relation Between Fracture Toughness and Charpy Fracture Energy - An Analytical Approach”, Pendulum Impact Testing: A Century of Progress, ASTM STP 1380, T. Siewert and M. P. Manahan, Sr., Eds., American Society for Testing and Materials, West Conshohocken, PA, 1999. 337-353

  75. Böhme, W., Schindler, H.J., Application of single specimen methods on instrumented Charpy tests: Results of DVM round robin exercises., Pendulum Impact Testing: A Century of Progress, ASTM STP 1380, 1999, 327-336.

  76. Schindler, H.J., "Residual Stress Measurement in Cracked Components: Capabilities and Limitations of the Cut Compliance Method, Proc. of 5th European Conf. on Residual Stresses, Materials Science Forum Vols. 347-349, 2000, 150-155

  77. Schindler, H.J., Bertschinger, P., Nguyen, C.H., Knobel, R., Determination and Evaluation of Residual Stresses in Thick-walled Cylinders due to Autofrettage, Proc. of 6th Int. Conf. on Residual Stress, July 200, Oxford,UK, 837-844.

  78. Schindler, H.J., On the preferable initial crack-length in fracture toughness testing using sub-sized specimens, Proc. of 13th European Conference on Frcature, Sept. 2000, San Sebastian, Spain (on CD)

  79. Schindler, H.J., Varga, T, Loibnegger, F., Nöggerath J., "Ageing and Irradiation Surveillance by Means of Impact Testing of Precracked Charpy Specimens", Proc. of Int. Symp. on Materials Ageing and Life Management, Oct. 3 – 6, 2000, Kalpakkam, India, pp. 837-845

  80. Schindler, H.J., Abschätzung von Bruchzähigkeitskennwerten aus der Bruch- oder Kerbschlagarbeit, Materialwissenschaft und Werkstofftechnik, Vol. 32, No. 6, 2001

  81. Schindler H.J., Anwendungsorientiertes Konzept zur Berücksichtigung der Constraint-Effekte in der technischen Bruchmechanik, DVM-Bericht 233, 105-115, 2001

  82. Schindler, H.J., Tipping, Ph., , Instrumented impact testing of pre-cracked charpy-type specimens to obtain fracture toughness data for use in master curve methodology, IAEA Specialsists Meeting on Mastercurve Testing and Application, Paper No. 18, Prague, C.R., September 2001

  83. Schindler, H.J., Bertschinger , P., Scaling laws of data obtained from miniature Charpy tests and teir relation to fracture toughness, NATO-Workschop on Transferability of Fracture Mechanical Data, Brno 2001, (in press)

  84. Schindler, H.J, Strain energy density as the link between global and local approach to fracture, Proc. of 10th Int. Conf. on Fracture, Honolulu, Ed. K. Ravi-Chandar, et al., Pergamon, 2001 (on CD)

  85. Schindler, H.J., Dauerfestigkeitsnachweis für gekerbte Bauteile mit Imperfektionen unter Anwendung bruchmechanischer Beziehungen und Schwellenwerte, DVM-Bericht 234, pp. 67-76, 2002

  86. Schindler, H.J., Primas, R., Veidt, M., The fracture behaviour of a weldes tubular joint: An ESIS Round Robin on Failure Assessment Methods. Part V: Screening Method by required toughness and plastic stability considerations, Engineering Fracture Mechanics, Vol. 69, pp. 1149-1160, 2002-07-19

  87. Schindler, H.J., Bertschinger, P., Semenov, B., Near-surface stress measurement in 2D and 2D by the cut compliance technique, Material Science Forum, Vols. 4004-4007 (Proc. 6th Europ. Conf. on Residual Stress), pp. 515-520, 2002

  88. Schindler, H.J., Preferable initial Crack Length for Fracture Toughness Evaluation using Sub-Sized Bend Specimens, Small Specimen Test Techniques: Fourth Volume, ASTM STP 1418 , M.A. Sokolov and J.D. Landes, Eds., American Society for Testing and Materials, West Conshohocken, PA, 2002.

  89. Tipping, Ph, Schindler, H.J., Comments Concerning Master Curve, Proc. MASC-Workshop:"Use and Applications of the Master Curve for Determining Fracture Toughness", Helsinki-Stockholm-Helsinki, June 12-14, 2002

  90. Schindler, H.J., Bertschinger, P, Vodenicharov, S., Scaling of Charpy Fracture Energy with Specimen Size, 14th European Conference on Fracture, Krakow (P), September 2002

  91. U.E. Klotz, M. Zgraggen, O.v. Trzebiatowski, H.-J. Schindler, M. Winkler, K. Pitschieler, Eigenspannungsmessungen an einem geschweissten Kastenprofil, submitted to Materialwissenschaft und Werkstofftechnik

  92. Schindler, H.J., Bertschinger P., Instrumentierte Eindringprüfung zur ambulan­ten quasi-zerstörungsfreien Prüfung mechanischer Eigenschaften. Tagungsband „Werkstoffprüfung 2002“, Bad Nauheim, 2002.

  93. Schindler, H.J., Berücksichtigung der Constraint-Effekte in der technischen Bruchmechanik, Materialprüfung, Jahrgang 44, 448-453, 2002.

  94. Tipping, Ph., Bertschinger, P., Schindler, H.J., Characterisation of local mate­rial behaviour of a welded pipe by instrumented indentation test using Meyer’s approach, Proc. 9th int. Conf. on Mechanical Behaviour of Materi­als (ICM9), Geneva 25-29 May, 2003.

  95. Schindler, H.J. and Bertschinger P., Recent developments in quasi-non-destructive evaluation of strength and toughness properties, Proceed­ings of 9. International Conference on the Mechanical Behaviour of Materials, (ICM 9), 2003.

  96. Schindler, H.J., Effects of residual stresses on crack growth and structural safety, Proceedings of the 9th Int. Conf. on Mechanical Behaviour of Materials (ICM 9, invited sectional lecture), Geneva, 2003.

  97. Lehmann, H., Harzenmoser, M., Schindler, H.J., Characterisation of  fracture toughness of martensitic steel brazed with a gold-nickel alloy, Proceedings of the 9th Int. Conf. on Mechanical Behaviour of Materials (ICM 9), Geneva, 2003.

  98. Schindler H.J., An Engineering Concept to Account for Crack-Tip Constraints, Facta Universitatis, Series Mechanics, Automatic Control and Robotics, Special Issue on Damage and Fracture, Vol.3, No 13, 2003.

  99. Schindler, H.J., Abschätzung der wahren Spannungs-Dehnungs-Kurve mit instrumentierten Kugeleindruckversuchen, in „Herausforderungen durch den industriellen Forzschritt“, Ed. O. W. Buchholz und  St. Geisler, Verlag Stahleisen GmBH, Düsseldorf, 124-134, 2003.

  100. Schindler, H.J., On quasi-nondestructive strength and toughness testing of elastic-plastic materials, Int. Journal of Solids and Structures, 42, 717-725, 2004.

  101. Sigrist, Ch., Schweizer, J., Schindler, H.J., Dual, J., "Fracture toughness of snow: size effects in a quasi-brittle material", Proc. of 11th Int. Conf. on Fracture, Mai 2004

  102. Lehmann, H., Schindler, H.J., Strength and fracture toughness of gold-nickel brazing under different loading conditions, Welding in the World, Jan. 2005.

  103. Schindler, H.J., Sönnichsen, S., Martens, H.J., A Fracture Mechanics Approach to Estimate the Fatigue Endurance of Welded T-Joints Including Residual Stress Effects, Fatigue and Fracture of Eng. Materials and Structures, Vol. 30, 206 - 213, 2006

  104. Leinenbach, Ch., Lehmann, H., Schindler, H.J., Mechanisches Verhalten und Fehlerempfindlichkeit von Hartlötverbindungen; Materialprüfung, 49. Jahrgang, 149 - 155, 2007

  105. Schindler, H.J., Sönnichsen, S., Martens, H.J., Bruchmechanische Berechnung der Dauerfestigkeit eines Geschweissten T-Stosses unter Berücksichtigung der Eigenspannungen, Deutscher Verband für Materialforschung und -prüfung, DVM-Bericht 239, 163 - 172, 2007

  106. Leinenbach, Ch., Schindler, HJS, et al., Fracture Behaviour and Defect Assessment of Brazed Steel Joints, Proc. of 14th European Conf. on Fracture, ECF 14, Brno, C.R., 2121 - 2128, 2008

  107. Schindler, H.J., Kalkhof, D., Tipping, P., Determination of Transferable Lower-Bound Fracture Toughness from Small Specimens, Journal of ASTM International, Vol. 5, No. 8, 2008

nach oben

Mat-Tec AG
E-Mail
Update 12.2.2010

Seite drucken
Webmaster