Publikationsliste - H.J. Schindler
| # 114 | Prediction of Rapid Ductile Crack Extension by an Analytical Approach, Proceedings of 11th Int. Pipeline Conference IPC2010, Paper No. IPC2010-31176, 2010 |  (285 KB) |
| # 113 | Untere Grenzkurven der Bruchzähigkeit im Zäh-spröd-Übergangsbereich aus Versuchen an kleineren Proben, Deutscher Verband für Materialforschung und -prüfung, DVM-Bericht 242, S. 217 - 226, 2010 | (125 KB) |
| # 112 | Cyclic Fracture Behaviour of Brazed Martensitic Stainless Steel Joints, 12th Int. Conference on Fracture, Ottawa, July 2009 | |
| # 111 | Analytical relation between crack arrest capability of a pipeline and its Charpy fracture energy , 12th Int. Conference on Fracture, Otawa, July 2009 | |
| # 110 | Determination of residual stresses in brazed compressor impellers and assessment of their effect on fatigue crack growth, Journal of ASTM International, Vol. 7, No. 3, Paper ID JAI102515 | |
| # 109 | Determination of Transferable Lower-Bound Fracture Toughness from Small Specimens, Journal of ASTM International, Vol. 5, No. 8, 2008 | (319 KB) |
| # 108 | Fracture Behaviour and Defect Assessment of Brazed Steel Joints, Proc. of 14th European Conf. on Fracture, ECF 14, Brno, C.R., 2121 - 2128, 2008 | |
| # 107 | Bruchmechanische Berechnung der Dauerfestigkeit eines Geschweissten T-Stosses unter Berücksichtigung der Eigenspannungen, Deutscher Verband für Materialforschung und -prüfung, DVM-Bericht 239, 163 - 172, 2007 | (300 KB) |
| # 106 | Mechanisches Verhalten und Fehlerempfindlichkeit von Hartlötverbindungen; Materialprüfung, 49. Jahrgang, 149 - 155, 2007 | |
| # 105 | 2006. The energy release rate of mode II fractures in layered snow samples. Int. J. Fract., 139(3-4): 461-475. | |
| # 104 | Fracture Mechanics Approach to Estimate the Fatigue Endurance of Welded T-Joints Including Residual Stress Effects, Fatigue and Fracture of Eng. Materials and Structures, Vol. 30, 206 - 213, 2006 | |
| # 103 | 2005. On size and shape effects in snow fracture toughness measurements. Cold Reg. Sci. Technol., 43(1-2): 24-35 | |
| # 102 | Strength and fracture toughness of gold-nickel brazing under different loading conditions, Welding in the World, Jan. 2005. | |
| # 101 | "Fracture toughness of snow: size effects in a quasi-brittle material", Proc. of 11th Int. Conf. on Fracture, Mai 2004 | |
| # 100 | On quasi-nondestructive strength and toughness testing of elastic-plastic materials, Int. Journal of Solids and Structures, 42, 717-725, 2004 | (250 KB) |
| # 99 | Abschätzung der wahren Spannungs-Dehnungs-Kurve mit instrumentierten Kugeleindruckversuchen, in "Herausforderungen durch den industriellen Fortschritt", Ed. O. W. Buchholz und St. Geisler, Verlag Stahleisen GmBH, Düsseldorf, 124-134, 2003 | |
| # 98 | An Engineering Concept to Account for Crack-Tip Constraints, Facta Universitatis, Series Mechanics, Automatic Control and Robotics, Special Issue on Damage and Fracture, Vol.3, No 13, 2003 | |
| # 97 | Characterisation of fracture toughness of martensitic steel brazed with a gold-nickel alloy, Proceedings of the 9th Int. Conf. on Mechanical Behaviour of Materials (ICM 9), Geneva, 2003, | |
| # 96 | Effects of residual stresses on crack growth and structural safety, Proceedings of the 9th Int. Conf. on Mechanical Behaviour of Materials (ICM 9, invited sectional lecture), Geneva, 2003, | |
| # 95 | Recent developments in quasi-non-destructive evaluation of strength and toughness properties, Proceedings of 9. International Conference on the Mechanical Behaviour of Materials, (ICM 9), 2003 | |
| # 94 | Characterisation of local material behaviour of a welded pipe by instrumented indentation test using Meyer's approach, Proc. 9th int. Conf. on Mechanical Behaviour of Materials (ICM9), Geneva 25-29 May, 2003. | |
| # 93 | Berücksichtigung der Constraint-Effekte in der technischen Bruchmechanik, Materialprüfung, Jahrgang 44, 448-453, 2002 | |
| # 92 | Instrumentierte Eindringprüfung zur ambulanten quasi-zerstörungsfreien Prüfung mechanischer Eigenschaften. Tagungsband "Werkstoffprüfung 2002", Bad Nauheim, 2002 | (100 KB) |
| # 91 | Eigenspannungsmessungen an einem geschweissten Kastenprofil, Materialwissenschaft und Werkstofftechnik, Vol. 33, 544-549, 2002 | |
| # 90 | Scaling of Charpy Fracture Energy with Specimen Size, 14th European Conference on Fracture, Krakow (P), September 2002 | (55 KB) |
| # 89 | Preferable initial Crack Length for Fracture Toughness Evaluation using Sub-Sized Bend Specimens, Small Specimen Test Techniques: Fourth Volume, ASTM STP 1418 , M.A. Sokolov and J.D. Landes, Eds., American Society for Testing and Materials, West Cons | (81 KB) |
| # 88 | Near-surface stress measurement in 2D and 2D by the cut compliance technique, Material Science Forum, Vols. 4004-4007 (Proc. 6th Europ. Conf. on Residual Stress), pp. 515-520, 2002 | (111 KB) |
| # 87 | The fracture behaviour of a welded tubular joint: An ESIS Round Robin on Failure Assessment Methods. Part V: Screening Method by required toughness and plastic stability considerations, Engineering Fracture Mechanics, Vol. 69, pp. 1149-1160, 2002-07- | (286 KB) |
| # 86 | Comments Concerning Master Curve, Proc. MASC-Workshop:"Use and Applications of the Master Curve for Determining Fracture Toughness", Helsinki-Stockholm-Helsinki, June 12-14, 2002 | |
| # 85 | Dauerfestigkeitsnachweis für gekerbte Bauteile mit Imperfektionen unter Anwendung bruchmechanischer Beziehungen und Schwellenwerte, DVM-Bericht 234, pp. 67-76, 2002 | (229 KB) |
| # 84 | Strain energy density as the link between global and local approach to fracture, Proc. of 10th Int. Conf. on Fracture, Honolulu, Ed. K. Ravi-Chandar, et al., Pergamon, 2001 (on CD) | (56 KB) |
| # 83 | Scaling laws of data obtained from miniature Charpy tests and their relation to fracture toughness, NATO-Workschop on Transferability of Fracture Mechanical Data, Brno, Czech Republic, 2001 | (73 KB) |
| # 82 | Instrumented impact testing of pre-cracked charpy-type specimens to obtain fracture toughness data for use in master curve methodology, IAEA Specialsists Meeting on Mastercurve Testing and Application, Paper No. 18, Prague, C.R., September 2001 | (79 KB) |
| # 81 | Anwendungsorientiertes Konzept zur Berücksichtigung der Constraint-Effekte in der technischen Bruchmechanik, DVM-Bericht 233, 105-115, 2001 | (54 KB) |
| # 80 | Abschätzung von Bruchzähigkeitskennwerten aus der Bruch- oder Kerbschlagarbeit, Materialwissenschaft und Werkstofftechnik, Vol. 32, No. 6, 2001 | (80 KB) |
| # 79 | "Ageing and Irradiation Surveillance by Means of Impact Testing of Precracked Charpy Specimens", Proc. of Int. Symp. on Materials Ageing and Life Management, Oct. 3 - 6, 2000, Kalpakkam, India, pp. 837-845 | (70 KB) |
| # 78 | On the preferable initial crack-length in fracture toughness testing using sub-sized specimens, Proc. of 13th European Conference on Frcature, Sept. 2000, San Sebastian, Spain (on CD) | (81 KB) |
| # 77 | Determination and Evaluation of Residual Stresses in Thick-walled Cylinders due to Autofrettage, Proc. of 6th Int. Conf. on Residual Stress, July 200, Oxford,UK, 837-844. | (61 KB) |
| # 76 | "Residual Stress Measurement in Cracked Components: Capabilities and Limitations of the Cut Compliance Method, Proc. of 5th European Conf. on Residual Stresses, Materials Science Forum Vols. 347-349, 2000, 150-155 | (36 KB) |
| # 75 | Application of single specimen methods on instrumented Charpy tests: Results of DVM round robin exercises., Pendulum Impact Testing: A Century of Progress, ASTM STP 1380, 1999, 327-336. | (71 KB) |
| # 74 | "Relation Between Fracture Toughness and Charpy Fracture Energy - An Analytical Approach", Pendulum Impact Testing: A Century of Progress, ASTM STP 1380, T. Siewert and M. P. Manahan, Sr., Eds., American Society for Testing and Materials, West Consho | |
| # 73 | Einsatzmöglichkeiten des instrumentierten Kerbschlaghammers in der Material- und Bauteilprüfung, DVM-Bericht 232, Berlin, 2000, DVM 2000, 143-141 | |
| # 72 | Ermittlung bruchmechanischer Kennwerte mittels Schlagbiegeversuchen an Kleinproben, DVM-Bericht 232, Berlin, 2000, DVM 2000, 133-142 | |
| # 71 | On the Significance of Crack Tip Shielding in Fatigue Threshold - Theoretical Relations and Experimental Implications, in: Advances in Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372, J.C. Newman and R.S. Piascik, Eds., A | (81 KB) |
| # 70 | An Engineering Framework to Account for Crack-Tip-Constraints in Fracture Mechanics, Proc. of 8th Int. Conf. on the Mechanical Behaviour of Materials, Victoria, CA, 1999, pp. 25 - 30 | (58 KB) |
| # 69 | Experimental Determination of Crack Closure by the Cut Compliance Technique, in: Advances in Fatigue Crack Closure Measurement and Analysis, ASTM STP 1343, R.C. McClung and J.C. Newman, Jr., Eds., American Society for Testing and Materials, 1999, pp | (79 KB) |
| # 68 | Experimentelle Ermittlung der Rissschliessung an Baustahl und Schweisseisen im Bereich des Schwellenwerts, Berichtband der 31. Tagung des DVM AK Bruchvorgänge, DVM-Bericht 231, Darmstadt, 1999, 153-163 | |
| # 67 | Charakterisierung und Abschätzung des Ermüdungsrissverhaltens im Bereich des Schwellenwerts, Berichtband der 31. Tagung des DVM AK Bruchvorgänge, DVM-Bericht 231, Darmstadt, 1999, 121-131 | (74 KB) |
| # 66 | Grundlagen und Anwendungen der technischen Bruchmechanik, Tagungsband zum Weiterbildungsseminar Bruchmechanische Bauteilbewertung, EMPA, November 1998 | |
| # 65 | The correlation between Charpy fracture energy and fracture toughness from a theoretical point of view, Proc. 12th European Conference on Fracture, Sheffield, 1998, 841-847 | |
| # 64 | The effect of crack length on fracture mechanics properties estimated from instrumented Charpy-type-tests, Proc. 12th European Conference on Fracture, Sheffield, 1998, 1279-1285 | |
| # 63 | Fracture Toughness Evaluation from Instrumented Sub-size Charpy-Type Tests, in: Small Specimen Test Techniques, ASTM STP 1329, W.R. Corowin, et al., Eds., 1998, 48 - 62 | (64 KB) |
| # 62 | Analytisches Modell zur Berechnung der Rissausbreitungsgeschwindigkeit unter Ermüdungsbeanspruchung, Berichtsband der 30. Vortragsveranstaltung des DVM-AK Bruchvorgänge, 1998, 333-342 | |
| # 61 | On the effect of notch radius and local friction on the mode I and II fracture toughness of a high strength steel, Eng. Fracture Mechanics, Vol. 58, 1997, 223-231 | |
| # 60 | Determination of tensile properties at increased strain rates and various temperatures, J. Testing and Evaluation, 25, 1997, 571-575 | |
| # 59 | Experimental determination of stress intensity factors due to residual stresses, Experimental Mechanics, Vol. 37, 1997, 272-277 | |
| # 58 | Determination of Residual Stresses and the Resulting Stress Intensity Factors on the Ligament of Pre-Cracked Plates. In: Proc. Int. Conf. on Fracture, Sydney, 1997, 523-530 | |
| # 57 | Size Effects on Fracture Toughness of Brittle Materials. International Journal of Fracture 82, 1996, R3-R10 | |
| # 56 | On spurious reflection waves in Hopkinson bar tensile tests using a collar. J. Phys. IV France, 7, Colloque C3, 1997, C3-85 - C3-90 | |
| # 55 | Sicherheitsanalyse eines Druckbehälters: Nachauswertung eines Schadenfalles. In: Inter- nationale Konferenz über Schweisstechnik, Werkstoffe und Werkstoffprüfung, Bruchmechanik und Qualitätsmanagement, TU Wien, 22-25 September 1997, 393-402 | |
| # 54 | Bruchmechanische Analyse an einem grossen Bajonettgewinde. In: Berichtsband, 29. Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart, 25-26. Februar 1997, | |
| # 53 | Bruchmechanische Bauteilbewertung: Verfahren, Regelwerke, Anwendungen. In: Berichtsband 29. Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart, 25-26 Februar 1997, S, 71-82 | |
| # 52 | Some Steps Towards Automation of the Crack Compliance Method to Measure Residual Stress Distributions. In: Proc. 5th Int. Conference on Res. Stress, Linköping, June 1997 | (48 KB) |
| # 51 | Grösseneffekte im Bruchverhalten keramischer Werkstoffe. In: Berichtsband 29. Tagung des DVM- Arbeitskreises Bruchvorgänge, Stuttgart, 25-26 Februar 1997, S. 359-368 | |
| # 50 | Mechanische Verfahren zur Bestimmung von Eigenspannungen, Tagungsband zur Seminartagung "Eigenspannungen - Fluch oder Segen?", EMPA, 1996, 79-90 | |
| # 49 | Rissbeanspruchung durch Eigenspannungen - Ein neues Verfahren zur experimentellen Bestimmung von Spannungsintensitätsfaktoren. EMPA- Jahresbericht 1995: Werkstoffe, S.55-59 | |
| # 48 | Erprobung von Einprobenmethoden zur bruchmechanischen Auswertung instrumentierter Kerbschlagbiegeversuche. In: Berichtsband 28. Tagung des DVM- AK Bruchvorgänge, Bremen, 1996, S.67-77 | |
| # 47 | Estimation of the dynamic J-R-curve from a single impact bending test. In: ECF 11: Mechanisms and mechanics of damage and failure - 11th biennial European conference on fracture, Poitiers- Futuroscope, France, 1996, Vol.III, S.2007-2012 | |
| # 46 | Determination of residual stress distributions from measured stress intensity factors. International journal of fracture 74(1995)S.R23-R30 | |
| # 45 | A CTOA-based approach to burst and leak-before-break behaviour. International Journal of Pressure Vessels & Piping 69 (1996) 2, S.125-134 | |
| # 44 | Teaching and application of engineering fracture mechanics: the necessity of uniting simplicity and rationality. In: Teaching and education in fracture and fatigue, Rossmanith, H.P. (Editor). London: E & FN Spon, 1996, ISBN 0-419- 2070-77. | |
| # 43 | Nachweis der Sprödbruchsicherheit für geschweisste Stahlkonstruktionen. Stahlbau 65(1996)11, S.415-420 | |
| # 42 | Böhme,W., Stark-Seuken, D., Blumenauer, H., Wobst, K., Erprobung von Einprobenmethoden zur bruchmechanischen Auswertung instrumentierter Kerbschlagbiegeversuche DVM-Bericht 228, 28. Tagung des DVM-Arbeitskreises Bruchvorgänge, 26. - 27. Februar, 1996 | |
| # 41 | Estimation of the Dynamic J-R-Curve from a single Impact Bending Test, Proc. 11th Europena Conf. On Fracture, ECF 11- Mechanisms and Mechanics of Damage and Failure, Volume II, Editor J. Petit, 1996, p. 2007 - 2012 | |
| # 40 | Single specimen methods to evaluate J-R-curves from instrumented Charpy tests: Results of a round robin. In: ECF 11: Mechanisms and mechanics of damage and failure - 11th European conference on fracture, Poitiers- Futuroscope, France, 3-6 September 1 | |
| # 39 | Experimental determination of residual stresses and the resulting stress intensity factors in rectangular plates, Proceedings 4th. European Conf. on Residual Stresses, Ed. S. Denis, et al., June 1996, 509-517 | |
| # 38 | The Use of Instrumented Impact Testing on Pre-cracked Charpy Specimens in Engineering Integrity Assessment Evaluating Material Properties by Dynamic Testing, ESIS 20, Mechanical Engineering Publications, London, 1996, p. 45 - 58, | |
| # 37 | Tagungsband zum Statusseminar Werkstoffdynamik - Werkstoffverhalten unter schneller Beanspruchung, organisiert durch EMPA und SVMT. Dübendorf, 6. Oktober 1995, ca. 175 S. | |
| # 36 | Determination of residual stress distributions from measured stress intensity factors, Int. Journal of Fracture 74, R23 - R30,1995 | |
| # 35 | Schadens- und Sicherheitsanalyse an betriebsgeschädigten Stahlrollen von Brückenlagern. Forschungsauftrag 87/90 auf Antrag der Arbeitsgruppe für Brückenforschung des ASB.EVED/ ASB Bericht Nr. 517, Juni 1995 | |
| # 34 | Key issues of instrumented pre-cracked Charpy-type testing in irradiation surveillance programmes. In: Int. symposium on materials aging and component life extension, Mailand, 10-13 October 1995, Vol. II, p.1367-1377 | |
| # 33 | Toughness evaluation and assessment of old bridge steel, Proceedings of IABSE symposium on extending the lifespan of structures, San Francisco, 1995, Vol. 73/2 p. 1313 - 1318 | |
| # 32 | Determination and use of fracture toughness under increased loading rates, In: Statusseminar Werkstoffdynamik, EMPA Dübendorf, 6. Okt. 1995, p. 8.1 - 8.13 | |
| # 31 | Experimentelle Bestimmung von Spannungsintensitätsfaktoren aus Eigenspannungen, Berichtsband zur 27. Vortragsveranstaltung des DVM-Arbeitskreises Bruchvorgänge, Köln-Porz, 14.-15. Feb. 1995, p. 421 - 430 | |
| # 30 | A CTOA-based approach to leak-before-break behaviour, 7th int. Conference on Mechanical Behaviour of Materials, The Hague, 18 May-2-June 1995, Book of Abstracts, p. 527-528 | |
| # 29 | Von Formeln und Materialien. Die "Tetmajer-Gerade" und ihre wissenschaftlich-technische Bedeutung In: Ludwig von Tetmajer Przerwa, Hrsg. J. Zielinski, p. 107-109, 1995 | |
| # 28 | Dynamische Zähigkeitsprüfungen, Int. Statusseminar Werkstoffdynamik, EMPA-Dübendorf, 6.10.95, p, 8.1 - 8.13 | |
| # 27 | Low-Cost Dynamic Tensile Testing, J. de Physique IV, Colloque C8, Supplement au J. de Physique III, Vol. 4, 1994, C8-135-C8-140 | |
| # 26 | Determination of Residual Stress in a Roller of High Strength Steel, Proc. of the 4th Int. Conf. on Residual Stress, Baltimore, 1994 | |
| # 25 | On the Required Toughness of Structural Materials, Proc. of 2nd. Int. Conf. on Engineering Integrity Assessment, Glasgow, 1994, 397-405 | |
| # 24 | Nachweis der Sprödbruchsicherheit auf der Basis der "erforderlichen Zähigkeit", Berichtsband zur 26. Tagung des DVM-AK Bruchvorgänge, DVM, 1994, 423-422 | |
| # 23 | EM-Round Robin Test Programme, Part1: Comparison between results of VTT and EMPA, VTT-Report VTT-MET B-249, 1993 | |
| # 22 | Weight Functions for Deep Cracks and High Stress Gradients, Proc. Int. Conference on Fracture, Kiev, 1993, 1266-1275 | |
| # 21 | A Closer Look at Estimation of Fracture Toughness from Charpy V-Notch Tests, Int. J. Pressure Vessels and Piping, Vol. 55, 1993, 203-212 | |
| # 20 | "On numerical Evaluation of Stress Biaxiality in the Vicinity of a Crack", in: Localized Damage, Computational Mechanics Publications, Southampton, 1992, 229 - 243 | |
| # 19 | Toughness Testing and Assesssment of Welds, Int. Conf. on Engineering Design in Welded Constructions, Madrid, 205-212, 1992 | |
| # 18 | Tearing Stability of Surface Cracks in Plates or Shells, Proc. of 9th European Conf. on Fracture, Varna, p. 1157-1172, 1992 | |
| # 17 | Approximative Bestimmung dynamischer Jc-Werte und J-R-Kurven mit Schlagbiegeversuchen, Tagungsband der 24. Vortragsveranstaltung des DVM-Arbeitskreises Bruchvorgänge Aachen, p.119 - 129, 1992 | |
| # 16 | Influence of aging on the fracture toughness of cryogenic austenitic materials, evaluation by a simple test method, Advances in Cryogenic Engineering Materials, Vol. 38, Ed. F.R. Fickett and R.P. Reed, Plenum Press, N.Y., 1992, 191-198 | |
| # 15 | Determination of fracture mechanics material properties utilizing notched test specimens, Proceed. 6th, Int. Conf. Mech. Behaviour of Materials, Kyoto, 1991, p. 159 - 164 | |
| # 14 | Zähes Versagen von gekerbten und angerissenen Zylindern unter Innendruck, Berichtband der 23. Vortragsveranstaltung DVM-AK Bruchvorgänge, Berlin, 1991 | |
| # 13 | Zäher Bruch eines rissbehafteten Plattenstreifens: Vergleich zwischen Experiment und analytischer Berechnung, Berichtband DVM-Tagung "Werkstoffprüfung 1990", Bad Nauheim, 1990 | |
| # 12 | Auslegung geschweisster Druckrohrleitungen mit erweitertem Sicherheitskonzept und bruchmechanischer Analyse, Berichtband 6. Int. Seminar Wasserkraftanlagen, Wien, 1990 | |
| # 11 | Crack-growth in rollers due to moving Hertzian compression, Proceedings of the 8th European Conf. on Fracture, Torino, 1990 | |
| # 10 | Toughness and fracture behaviour of obsolete wrought bridge steel, Report IABSE Workshop Lausanne 1990 | |
| # 9 | On the path-stability of standard and side-grooved DCB-specimen, Proceedings of the 7th European Conf. on Fracture, Budapest, 1988 | |
| # 8 | Nichtlineares finites Element zur Modellierung eines frei laufenden Exzenters, Berichtband der Seminartagung "Nicht-lineare Systeme", ETH Zürich, 1987 | |
| # 7 | On the ralationship between J-Integral and crack opening displacement, Engineering Fracture Mechanics, Vol. 20, No. 2, p. 281-287, 1984 | |
| # 6 | Instabilities in the fracture of brittle beams under flexural loading, Inst. Phys. Conf. Ser. No. 70, Oxford, 1984 | |
| # 5 | Path of a crack in a beam due to dynamic flexural fracture, Int. Journal of Fracture, Vol. 25, p. 95 - 107, 1984, | |
| # 4 | Multiple fractures produced by the bending of brittle beams, J. Mech. Phys. Solids, vol. 31, No. 5, p. 427-437, 1983 | |
| # 3 | Dynamischer Bruch eines Balkens unter Biegung, Diss. ETH-Nr. 7079, 1982 | |
| # 2 | Path- instability of a crack in a beam, J. Appl. Mathematics and Physics (ZAMP), Vol. 32, p. 570 - 581, 1981 | |
| # 1 | Sprödbruchprüfung von Stählen aus der Stahlbetontechnik, Material u. Technik, Vol. 6, No. 1, p. 9-17, 1978 |
Publikationsliste - P. Bertschinger
| # 95 | Recent developments in quasi-non-destructive evaluation of strength and toughness properties, Proceedings of 9. International Conference on the Mechanical Behaviour of Materials, (ICM 9), 2003 | |
| # 94 | Characterisation of local material behaviour of a welded pipe by instrumented indentation test using Meyer's approach, Proc. 9th int. Conf. on Mechanical Behaviour of Materials (ICM9), Geneva 25-29 May, 2003. | |
| # 92 | Instrumentierte Eindringprüfung zur ambulanten quasi-zerstörungsfreien Prüfung mechanischer Eigenschaften. Tagungsband "Werkstoffprüfung 2002", Bad Nauheim, 2002 | |
| # 90 | Scaling of Charpy Fracture Energy with Specimen Size, 14th European Conference on Fracture, Krakow (P), September 2002 | |
| # 88 | Near-surface stress measurement in 2D and 2D by the cut compliance technique, Material Science Forum, Vols. 4004-4007 (Proc. 6th Europ. Conf. on Residual Stress), pp. 515-520, 2002 | |
| # 83 | Scaling laws of data obtained from miniature Charpy tests and their relation to fracture toughness, NATO-Workschop on Transferability of Fracture Mechanical Data, Brno, Czech Republic, 2001 | |
| # 77 | Determination and Evaluation of Residual Stresses in Thick-walled Cylinders due to Autofrettage, Proc. of 6th Int. Conf. on Residual Stress, July 200, Oxford,UK, 837-844. | |
| # 73 | Einsatzmöglichkeiten des instrumentierten Kerbschlaghammers in der Material- und Bauteilprüfung, DVM-Bericht 232, Berlin, 2000, DVM 2000, 143-141 | |
| # 68 | Experimentelle Ermittlung der Rissschliessung an Baustahl und Schweisseisen im Bereich des Schwellenwerts, Berichtband der 31. Tagung des DVM AK Bruchvorgänge, DVM-Bericht 231, Darmstadt, 1999, 153-163 | |
| # 52 | Some Steps Towards Automation of the Crack Compliance Method to Measure Residual Stress Distributions. In: Proc. 5th Int. Conference on Res. Stress, Linköping, June 1997 |